London Wall Type 100 - Electrical Operation

Type 100SE – Semi Electrical Operation

This operation allows manual movement of panels with electronic movement of panels top & bottom retractable seals & telescopic thrust unit.

• Each panel to be of 2-point suspension. (i.e. two trolley hangers per panel)
• Standard ceiling track is used with no visible parts.
• A 240 volt mains transformer, supplied by London Wall to mains supply provided by others, supplies each motor within each panel with 24 volts current which is conducted through each panel. The transformer is located in an acceptable accessible position.
• Both horizontal and vertical seals are operated individually by separate motors for the entire wall to allow each panel to be pushed open or pushed closed manually if required.
• All motors operate in sequence, from contact switches positioned in the panel edge profiles and are controlled from a manual switch with open/stop/close functions.
• No floor guide is required.

• Pass door panels, angled panels and glazing cut-outs are available.

Type 100E – Full Electrical Operation

This operation allows electronic movement of panels, their retractable top and bottom seals and telescopic thrust unit.

• Each panel needs to be of 2-point suspension (i.e. two trolley hangers per panel).
• Ceiling track size is 120mm wide x 150mm high and a minimum clearance of 100mm is required above the track.
• Various stacking options are available on request.
• Each trolley hanger is driven by an independent motor. There are no visible parts.
• A 240 volt mains transformer, supplied by London Wall to mains supply provided by others, supplies each motor with 24 volts current which is conducted through the ceiling track. The transformer is located in an acceptable accessible position.
• Both horizontal and vertical seals are operated individually by separate motors for the entire wall before each panel moves individually to the open position – the reverse when closing.
• All motors operate in sequence, from contact switches positioned in the panel edge profiles and are controlled from a manual switch with open/stop/close functions.
• When the seals are released, each panel moves at a speed of approximately 100mm per second.
• Panel thickness when stacked is 120mm.
• No floor guide is required.
• Pass door panels, angled panels and glazing cut-outs are available.

• Remote control activation is available upon request.

All technical specifications are subject to change.